Wrisco Aluminum Sheeting

I applied the wrisco aluminum sheeting using rubber contact cement and routered the edges off.

Installed the cabinet prior to the sheeting since its screwed from the outside of the birch sidewall.

I'm a Harley Davidson fan so I chose orange and black for my teardrop camper.
In this picture you can also see the aluminum corner trim. It bends rather well to the radius with a little patience,a hammer and a block of wood.

Started on the galley hatch. Used 1/4 inch shims on the left,right and bottom. 3/8 inch shim at the hinge.

Ran a string line to insure all the spars are inline. They are inserted in a 3/4 inch routered joint and gorilla glued and screwed.